Enterprise-grade network infrastructure built for speed, redundancy, and zero downtime. From design to deployment — connected, secured, scaled.
What We Do
A well-architected network is the backbone of every modern operation. Flagship Technologys designs, installs, and manages network infrastructure that performs flawlessly under pressure — whether you're running a small office or a multi-site enterprise.
We handle the full lifecycle: site survey, topology design, hardware procurement, installation, configuration, testing, and ongoing management. Every cable, switch, and access point is placed with purpose.
Our team is certified across Cisco, Ubiquiti, Meraki, and UniFi ecosystems. We don't just plug things in — we engineer systems that grow with your business.
Our Process
We assess your space, existing infrastructure, interference zones, and coverage requirements before a single cable is run.
A custom topology is designed — VLANs, subnets, firewall rules, AP placement — engineered for your exact use case.
Clean, certified installation. Every run labeled, every device configured, every connection tested to spec.
Ongoing remote monitoring, firmware management, and rapid-response support keeps your network healthy 24/7.
What's Included
Gigabit to 10G ethernet deployments with managed switches, routing, and redundancy built in.
High-density wireless with seamless roaming, band steering, and rogue AP detection.
Isolate traffic by department, device type, or security zone for performance and safety.
Next-gen firewall configuration, IDS/IPS, content filtering, and VPN tunnels.
Centralized dashboard control via Meraki, UniFi Cloud, or equivalent platforms.
Site-to-site VPNs, MPLS, and SD-WAN solutions linking all your locations seamlessly.
Industries We Serve
Tell us your scope and we'll put together a detailed quote — fast.
IP camera systems, NVR infrastructure, and intelligent monitoring that gives you eyes everywhere — in real time, from anywhere in the world.
What We Do
A modern surveillance system isn't just cameras on a wall — it's a strategic layer of intelligence across your entire property. Flagship Technologys designs camera systems with purpose, placing every lens for maximum coverage and minimum blind spots.
From retail loss prevention to enterprise perimeter security, we deploy IP-based systems with cloud-accessible footage, motion analytics, and remote pan-tilt-zoom control. Your facility stays protected whether you're on-site or halfway across the world.
We work with Hikvision, Dahua, Axis, and Hanwha platforms — selecting the right hardware for the right environment, indoors and out, day or night.
Our Process
We walk your property and map every entry, exit, blind spot, and high-risk zone to build a complete coverage plan.
Camera selection, placement schematics, recording requirements, storage sizing, and remote access architecture.
Professional mounting, cable runs, NVR/DVR setup, and full camera calibration — clean work, first time.
We walk you through the system, set up remote mobile access, and ensure your team knows how to use every feature.
What's Included
4K, fisheye, PTZ, license plate, and thermal options — matched to your environment.
Scalable recording with local and cloud storage. RAID redundancy available for critical installs.
Live and recorded footage accessible from any phone, tablet, or computer — 24/7.
Intelligent motion zones with instant push notifications and email alerts.
Infrared and color night vision cameras maintaining clear footage in complete darkness.
People counting, loitering detection, perimeter tripwires, and facial recognition options.
Industries We Serve
Get a custom camera layout and quote for your property today.
Conference rooms, digital signage, distributed audio, home theater — AV systems that impress clients, empower teams, and perform flawlessly every time you need them.
What We Do
First impressions live in the details — the clarity of your conference room display, the crispness of your lobby audio, the seamlessness of your presentation system. Flagship designs AV environments that elevate every space they touch.
From a single boardroom to a multi-zone campus audio deployment, we handle system design, equipment sourcing, installation, calibration, and integration with your existing control platforms.
We work with Crestron, Extron, QSC, Sonos, Samsung, LG, and Shure — building systems that are powerful to operate and dead-simple to use.
Our Process
We understand your space, audience, use cases, and budget — then design around those constraints, not around a product catalog.
Equipment selection, signal flow diagrams, zone mapping, control programming logic, and rack layout — documented and reviewed with you.
Professional installation with audio tuning, display calibration, and full system integration. Every decibel and pixel dialed in.
We train your staff, document every system, and remain on call for any adjustments, upgrades, or expansions.
What's Included
Displays, cameras, mics, codecs — fully integrated for Zoom, Teams, and Google Meet.
Commercial displays with content management software for lobbies, retail, menus, and wayfinding.
Multi-zone speaker systems with independent volume control for offices, restaurants, and retail.
LED and LCD video wall installations for command centers, lobbies, and events.
Dedicated cinema rooms with 4K/8K projection, Dolby Atmos surround, and automated control.
Crestron and Savant-based control panels, app control, and voice-activated AV management.
Industries We Serve
From boardroom to ballroom — let's design your perfect AV environment.
Know exactly who enters, where they go, and when — with keycard, mobile, and biometric access systems that give you total command over your facility.
What We Do
Physical security starts with controlling access. Flagship Technologys installs enterprise-grade access control systems that let you manage every door, gate, and restricted zone — from a single dashboard or your phone.
Whether you need a single keycard reader for a small office or a multi-site biometric system with time-based permissions and full audit trails, we design around your actual workflow — not a one-size solution.
We deploy Lenel, Genetec, Brivo, HID, and Suprema systems — ensuring your access control integrates seamlessly with your surveillance and alarm infrastructure.
Our Process
We map every access point, identify vulnerabilities, and define permission zones based on your org structure.
Reader placement, controller sizing, credential type selection, and software configuration — all documented before work begins.
Professional hardware installation, wiring, software setup, and credential provisioning — zero disruption to your operation.
Your team learns to manage credentials, pull reports, set schedules, and respond to access events — fully self-sufficient.
What's Included
RFID and smart card readers with proximity or contactless operation for offices and commercial spaces.
Fingerprint, palm vein, iris, and facial recognition for high-security zones requiring identity verification.
Use your phone as your key — Bluetooth and NFC-based access via secure mobile apps.
Every entry and exit logged with timestamp, credential, and photo — exportable for compliance.
Grant access only during approved hours, auto-lock after business hours, and holiday lockdown modes.
Digital visitor check-in with temporary credentials, host notifications, and badge printing.
Industries We Serve
Control every door. Know every entry. Start with a free access audit.
Alarm systems, intrusion detection, perimeter protection, and 24/7 monitoring — a complete security envelope for your people and assets.
What We Do
Security isn't a feature — it's the foundation. Flagship Technologys installs comprehensive alarm and intrusion detection systems that protect your facility from unauthorized entry, after-hours threats, and perimeter breaches.
Every system is custom-designed around your floor plan, threat model, and response requirements. From a single-door contact sensor to a multi-zone commercial alarm system with central station monitoring, we size the solution to the risk.
We partner with DSC, Honeywell, Bosch, and Napco — proven platforms that integrate with cameras, access control, and remote monitoring for a unified security posture.
Our Process
We evaluate your physical vulnerabilities, historical incident data, and compliance requirements to map risk zones.
Sensor placement, panel sizing, communication paths (cellular/IP), and monitoring station selection — all documented.
Every sensor, siren, keypad, and contact tested through full tamper and alarm cycles before handoff.
Central station connectivity, emergency response protocols, and app-based arming/disarming configured and tested.
What's Included
Door/window contacts, PIR motion sensors, and dual-tech sensors covering every zone of your property.
Commercial-grade control panels with cellular and IP communication paths for maximum reliability.
Acoustic sensors that detect the exact frequency of breaking glass — triggered before entry is made.
UL-listed monitoring stations with immediate police, fire, and medical dispatch capability.
Mobile app and web portal control — arm, disarm, check status, and receive instant alerts anywhere.
Outdoor motion beams, vibration sensors, and active infrared barriers for lot and fence line protection.
Industries We Serve
A security system built for your actual threat environment — not a cookie-cutter package.
Structured cabling that forms the physical foundation of your entire technology stack — installed clean, certified, and built to last decades.
What We Do
Every network, camera, access reader, and phone in your building depends on structured cabling done right. Flagship Technologys installs certified, standards-compliant cabling infrastructure that delivers maximum performance and longevity.
We run Cat6, Cat6A, and fiber optic cable with precision — labeled, tested, and certified. Every termination is clean, every pathway is planned, and every rack is organized for the technician who will open it in ten years.
Our installers are BICSI-trained and TIA/EIA-certified. We document every run, provide test results, and maintain an as-built cable record for your facility.
Our Process
We map every cable run, conduit path, and termination point — coordinating with contractors to avoid conflicts before work begins.
Clean, managed runs through walls, ceilings, conduit, and cable trays — every cable dressed, labeled, and protected.
Patch panels, keystones, and rack equipment terminated to spec — no shortcuts, no loose pairs.
Every run certified with a Fluke DSX cable certifier. Full test reports and as-built documentation delivered.
What's Included
Gigabit and 10G-ready copper runs supporting PoE+, PoE++, and high-bandwidth applications.
Single-mode and multimode fiber for backbone runs, cross-campus links, and high-density data centers.
Main and intermediate distribution frame installation — racks, patch panels, cable managers, and labeling systems.
RG6 and RG11 runs for CCTV, CATV, and satellite distribution systems.
Every copper and fiber run certified with industry-standard Fluke test equipment. Reports provided.
Complete cable records with port numbering, labeling schemes, and floor plan overlays for your records.
Industries We Serve
Clean cabling done right the first time — certified and documented.